Qlogic QLE2362 Instalační příručka Strana 120
- Strana / 122
- Tabulka s obsahem
- KNIHY
- Linux Environment 1
- Contents 3
- Chapter 8 Additional Notes 6
- ◆ Linux operating environment 7
- ◆ QLogic adapters and drivers 7
- Introduction 11
- Purpose of this document 12
- Host connectivity 12
- Boot device support 13
- Installation Steps 15
- Linux distribution of choice 17
- Summary of installation steps 18
- Installing the adapter 20
- Adapter edge connectors 23
- PCI Express slots 24
- PCI Express slots aligned 24
- Installing and Configuring 27
- Qlogic Corporation 28
- Upgrading the adapter BIOS 29
- 0 for Loop Only 33
- 1 for Point-to-Point 33
- QLogic Driver 37
- 2.4.x kernel 42
- Example: 44
- 4. Reboot the system 44
- 2.6.x kernels 45
- 3. Reboot the system 48
- is as follows: 58
- 4. Reboot the host 65
- IOCTL module for RHEL4 69
- module is as follows: 79
- Updating the 81
- CEE/Menlo Firmware 81
- Connecting to the 83
- Planning procedure 84
- Configuring a Boot 85
- Device on an EMC 85
- Storage Array 85
- Common limitations 88
- CLARiiON-specific limitations 89
- Preparing the host 91
- Upgrading the kernel 98
- Do you have a driver disk 99
- Driver Update OK 100
- Additional Notes 103
- Solution Enabler) 107
- Rebooting the host 108
- /dev/sd ln 111
- HPQ server-specific note 112
- HS40 (8839) 115
- Setting Up External Boot 115
- F1 to enter the server BIOS 116
- Enter. This boot 116
- Special Instructions 117
Související produkty a manuály pro Sítě Qlogic QLE2362
(12 stránky)
(172 stránky)
(108 stránky)
(166 stránky)
(122 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.166 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce