Qlogic QLA4010 Instalační příručka stáhnout pdf (Strana 31)

Booting from the External Storage Array

1-17

Installation and Configuration

Figure 1-11 Selectable Boot Settings Window

Selectable Boot is Disabled by default. Select this setting and press

Enter to enable Selectable Boot.

Scroll down to the (Primary) Boot Port Name, LUN: setting, and

press Enter.

The Fast!UTIL will now scan for attached FC devices (as shown in

Figure 1-12 on page 1-18). If physical connectivity to the array is

setup properly via zoning, then the array port will be found after this

scan. Use the <PageUp> and <PageDown> keys to navigate the list

of target IDs for the array port being used for boot.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 117 118

Windows Environment 1
Contents 3
Troubleshooting 4
AVANT GARDE Keystrokes 12
Installation and 15
Configuration 15
How this Guide Works 16
STOP: 0X0000007B 19
Figure 2- HBA edge connecters 21
PCI Express slots 22
PCI Express slots aligned 22
2322ipx.bin 26
QLogic Banner 28
Main Fast!Util Options Window 29
Configuration Settings Window 29
Adapter Settings Window 30
Enter 33
Warning Dialog 34
Fast!Util Options Window 34
QLogic BIOS Banner Screen 35
Firmware Boot Manager Menu 36
Device Mapping Table 37
QLogic Directory 38
QLogic efiutil all Upgrade 41
Utililty Install 42
QLogic Fibre Channel Drivers 44
Driver Handle Numbers 44
Edit Adapter Settings 46
Connection Option 46
Options Set 47
Example blkD as Array Port 48
Windows Setup with F6 Prompt 51
Base article Q240672.) 54
Existing Partitions 54
Pre-installation Guidelines 57
Driver Installation/ 58
SANsurfer Driver Selection 60
Post-installation 64
Procedures 64
SANsurfer HBA Install Wizard 65
Next to run the test 66
Show SAN 68
QLogic Advanced Utilities 69
Utilities Tabbed Page 71
SANsurfer Icon 73
Connect to the Host 74
Planning, Miscellaneous 77
Procedures, and 77
Download Firmware Dialog 82
BladeServer Restrictions 91
Driver Revision 93
Compmgmt.msc and press Enter 94
Updating the HBA 95
Driver in a Windows 95
2000 or Windows 95
2003 Host 95
Upgrading to 97
Windows 2003 from 97
Windows 2000 97
Set the HBA FC-AL Loop ID 102
PHYSICALDRIVE0 108
PHYSICALDRIVE4 108
PHYSICALDRIVE8 108
Problems and Solutions 109
Problem 4 110
Problem 5 110
Problem 6 110
Problem 7 111
Problem 8 111
Known Issues 112
Third-Party Software 113
Manager Software or Agents 114
SANsurfer Version 115

Komentáře k této Příručce

Žádné komentáře

Qlogic QLA4010 Instalační příručka Strana 31

Komentáře k této Příručce

Související produkty a manuály pro Barebones pro PC / pracovní stanice Qlogic QLA4010