Qlogic QLA2000F Instalační příručka Strana 20
- Strana / 32
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Installing the NetWare Driver 5 – NetWare Driver Installation
5-2 FC0153301-00 D
5.3
Installing the NetWare Driver
Perform the following steps to install the NetWare driver in a previously installed
NetWare 4.11, 4.2, or 5.X system.
NOTE: The following procedure modifies your NetWare STARTUP.NCF file to
load the driver automatically when your system boots.
1. Start Netware and load the NetWare Install program from the NetWare
server prompt (:).
Type the following command if you are using NetWare 4.11 or 4.2:
LOAD INSTALL
Type the following command if you are using NetWare 5.X:
LOAD NWCONFIG
2. Select Driver options from the main menu.
3. Select Configure disk and storage device drivers.
4. Select Select an additional driver.
5. Press <INSERT> to install an unlisted driver.
6. Insert the diskette that contains the QLogic driver into an appropriate drive.
7. Press <ENTER> to scan the diskette for the QLogic driver.
8. Press <ENTER> to select the QL2100.HAM driver.
9. If prompted, select Yes to copy the driver.
10. You are prompted for the server directory. Type the path of the server
directory, or press <ENTER> to accept the default.
11. If necessary, select Select/Modify Driver Parameters to modify the default
settings.
12. Press <F10> to save the parameter settings.
13. Select Save parameters and load driver to complete the NetWare set up.
NOTE: If ASPI support is required for the SCSI devices, you must load the
NWASPI.CDM module, which is provided by NetWare. For example:
LOAD QL2100.HAM
LOAD NWASPI.CDM
- QLA2000/2000F/2100/2100F 1
- Table of Contents 3
- Table Page 4
- Introduction 5
- General Description 6
- UnixWare Driver Installation 7
- 2-2 FC0153301-00 D 8
- Initial Installation of 8
- FC0153301-00 D 2-3 9
- 2-4 FC0153301-00 D 10
- SCO OpenServer 5.0 Driver 11
- Installation 11
- (qlc2100) 11
- Installing the SCO Driver 12
- Device Configuration 12
- System → Hardware → HardDisk 13
- 3-4 FC0153301-00 D 14
- (QL2100.SYS) 15
- 4-2 FC0153301-00 D 16
- FC0153301-00 D 4-3 17
- 4-4 FC0153301-00 D 18
- NetWare Driver Installation 19
- (QL2100.HAM) 19
- Installing the NetWare Driver 20
- OS/2 ADD Installation 21
- (QL21OS2.ADD) 21
- Driver Installation for OS/2 22
- FC0153301-00 D 6-3 23
- Installing the OS/2 Driver 24
- Troubleshooting 24
- (QLA2100) 25
- 7-2 FC0153301-00 D 26
- FC0153301-00 D 7-3 27
- 7-4 FC0153301-00 D 28
- 8-2 FC0153301-00 D 30
- FC0153301-00 D 8-3 31
- 8-4 FC0153301-00 D 32
Sanyo VDC-D1585VP manuels
Manuels d'utilisation et guides de l'utilisateur pour Caméras de sécurité Sanyo VDC-D1585VP.
Nous fournissons des manuels en pdf 1 Sanyo VDC-D1585VP à télécharger gratuitement par type de document : Manuel de l'utilisateur
Komentáře k této Příručce